Compact Vacuum Sealer for Preparing Pouch Cell Vacuum pre-sealing in glove box
Vacuum pre-sealing machine/ Vacuum sealer/ Pre-sealing machine
1.For pouch cell batteries lab
2.Easy to operate
3.One year warranty,one stop service,provide full solutions
GN-115 is a CE Certified compact vacuum sealer for sealing aluminum-laminated case in glove box after injection of electrolyte into pouch Li-ion cell or after formation for final seal (polymer Li-Ion cell). Heatable sealer blade is built into the chamber.
SPECIFICATIONS:
Equipment components:
The machine consists of the following major components
(1)mechanical part: The next template institutions, institutional vacuum chamber, the drive
mechanism, guide mechanism, the base body electrical box control section, etc.
(2) Electrical parts: pneumatic components, solid state relays, solenoids, photoelectric switches, etc.
(3)main components
Cylinder: SMC / AIRTAC
Bearing: NSK made high-quality
Thermostat: Omron (Japan Import)
Time Relay: Omron / Domestic high-quality
Intermediate relay: Omron (Japan Import)
Vacuum pre-sealing machine/ Vacuum sealer/ Pre-sealing machine
1.For pouch cell batteries lab
2.Easy to operate
3.One year warranty,one stop service,provide full solutions
GN-115 is a CE Certified compact vacuum sealer for sealing aluminum-laminated case in glove box after injection of electrolyte into pouch Li-ion cell or after formation for final seal (polymer Li-Ion cell). Heatable sealer blade is built into the chamber.
SPECIFICATIONS:
Type | GN-115 |
| Vacuum | up-90Kpa ~ 0 adjustable |
| Head temperature | room temperature ~ 250 °C, temperature adjustable |
| Temperature Accuracy | ± 2 °C |
| Sealing pressure | 0 ~ 7Kg/cm2 adjustable |
| Sealing time | 0 ~ 99 seconds adjustable |
| Edge Width | 5mm |
| Maximum Edge Dimensions | 200mm |
| Head Parallelism | with triple NCR, head pressure at 0.6MPa, temperature 200 °C, pressure out of uniform seal |
| Air Consumption | Approximately 0.2L compressed gas / each message once |
| Air Working speed | ≥ 180 times / h |
| Power | Using 500w heat pipe, heat the power consumption of about 1KW |
| Power supply | 220V/50Hz; |
| Compressed air source | 0.5 ~ 0.8Mpa; |
| Dimensions | Work Department: 470mm * 485mm * 435mm |
| Control box | 420mm * 325mm * 225mm |
| Weight | about 50Kg |
The machine consists of the following major components
(1)mechanical part: The next template institutions, institutional vacuum chamber, the drive
mechanism, guide mechanism, the base body electrical box control section, etc.
(2) Electrical parts: pneumatic components, solid state relays, solenoids, photoelectric switches, etc.
(3)main components
Cylinder: SMC / AIRTAC
Bearing: NSK made high-quality
Thermostat: Omron (Japan Import)
Time Relay: Omron / Domestic high-quality
Intermediate relay: Omron (Japan Import)